SOFTWARE / INFRASTRUCTURE / SECURITY / KENYA
Done
Action completed
Deployment Report Wireless Networking & ISP Solutions ISP Network Design Intermediate • 8 min read

How to design a small wireless ISP network

L Author: Lawrence Kamau (Lead Systems Architect & Infrastructure Engineer)
Reviewed by: Peter Mwangi (Senior Network & Field Infrastructure Engineer)
Published: May 1, 2026 • Last Updated: Nov 22, 2026 • Target Hardware: MikroTik CCR/RB core routers, Cambium ePMP 3000/Force 300, Ubiquiti airMAX AC, and managed VLAN switches.

Purpose: Architect a scalable, fault-isolated Wireless ISP (WISP) network from upstream fibre DIA intake through POP distribution sectors to customer premises.

Reference Network Topology
ISP Core: Upstream Fiber -> MikroTik PPPoE/RADIUS -> Distribution Switch -> Sector APs -> Customer CPE
NODE 01
Upstream Internet Source
Dedicated DIA Fiber / BGP Peering (WAN ether1)
NODE 02
Main Router (MikroTik RouterOS v7)
NAT, Firewall, PPPoE Server + RADIUS, Simple/Queue Trees
NODE 03
Distribution Switch (Managed VLAN Trunk)
VLAN 10 (Mgmt) + VLAN 200 (Customer PPPoE Transport)
NODE 04
Wireless AP / PtP Backhaul
Cambium ePMP Force 300 / Ubiquiti airMAX Sector (VLAN 10 Mgmt)
NODE 05
Subscriber Radio (SM / Station)
Roof-mounted CPE bridged to Customer Router WAN
NODE 06
Customer Router
PPPoE Client dial-up -> Local LAN & Wi-Fi

Prerequisites

  • Dedicated wholesale/DIA internet uplink with static public IPv4 block.
  • Elevated POP/mast site with reliable mains + solar/inverter battery backup.

Step-by-Step Configuration

STEP 01 — Core Routing & Subscriber Authentication Layer

Deploy a MikroTik core router running PPPoE Server + RADIUS authentication, CGNAT/Public NAT, and per-plan bandwidth queues.

STEP 02 — Separate Management Plane from Customer Plane

Assign a dedicated Management VLAN (e.g., VLAN 10) for all switches, backhauls, sector APs, and CPE radios, completely isolated from Customer Transport VLANs.

STEP 03 — Backhaul & Sector Distribution Design

Use dedicated 5 GHz PtP links (Cambium Force 300-25 or PowerBeam 5AC) to feed tower POPs, and GPS-synchronized 90°/120° sectors with ABAB channel reuse.

STEP 04 — Standardise CPE Installation & Grounding

Install roof-mounted subscriber radios bridged cleanly to an indoor customer Wi-Fi router dialing PPPoE, with surge arrestors and earthing at every mast.

Expected Results & Verification

A modular WISP topology capable of scaling from 50 to 500+ subscribers without flat Layer-2 broadcast storms or management exposure.

Troubleshooting Matrix

Issue:
Fix:
SECURITY HARDENING

Ensure all 5 GHz outdoor transmissions operate within Communications Authority of Kenya (CA) ISM/DFS frequency and EIRP limits.

BACKUP & RECOVERY

Maintain a documented IP/VLAN allocation spreadsheet and automated nightly router/radio configuration backups.

L
Lawrence Kamau Delight Engineering Team
Lead Systems Architect & Infrastructure Engineer
Specialization: MikroTik RouterOS 7, FreeRADIUS, Linux CWP Hosting Clusters & Network Architecture

Directs network architecture and server infrastructure at Delight Office Solutions, overseeing the core YouBroadband ISP routing matrix and enterprise deployments.

Tested on Delight Living ISP Network (YouBroadband)
Nairobi NOC • Kabiria Road, Dagoretti South
Related Technical Guides
Was this engineering guide helpful?
Need professional installation, auditing, or troubleshooting? Request Network Consultation →