How to Troubleshoot a Router with No Internet
When Wi-Fi shows connected without internet access, structured physical and gateway checks quickly isolate whether the issue is local or upstream.
Prerequisites
- Physical access to the fibre ONT/modem and Wi-Fi router.
Step-by-Step Configuration
Check the WAN/Internet LED on your router and the PON/LOS light on your fibre ONT. A blinking red LOS light indicates a fibre signal break.
Confirm the Ethernet patch cord from the ONT LAN port is firmly clicked into the router WAN/Internet port.
Power off both the ONT and router for 30 seconds. Power on the ONT first, wait 60 seconds, then power on the router.
Log in to the router status page to verify whether a WAN IP is assigned and confirm your ISP subscription is active.
Troubleshooting Matrix
Connect routers and ONTs to a surge-protected UPS to prevent configuration corruption during power fluctuations.
Leads physical wireless and optical deployments across Dagoretti South and greater Nairobi, specializing in interference mitigation and high-throughput point-to-point links.