SOFTWARE / INFRASTRUCTURE / SECURITY / KENYA
Done
Action completed
Deployment Report Wireless Networking & ISP Solutions Cambium Networks Configuration Intermediate • 7 min read

Configuring Cambium Force 300

L Author: Lawrence Kamau (Lead Systems Architect & Infrastructure Engineer)
Reviewed by: Peter Mwangi (Senior Network & Field Infrastructure Engineer)
Published: May 1, 2026 • Last Updated: Nov 22, 2026 • Target Hardware: Cambium Networks ePMP Force 300-13, Force 300-16, Force 300-19, Force 300-25, and Force 300 CSM running ePMP 802.11ac Wave 2 firmware (v4.6.x – v4.8.x).

Purpose: Baseline commissioning of a Cambium ePMP Force 300 radio—covering management IP assignment, country regulatory compliance, operating mode selection, and security hardening prior to mast mounting.

Reference Network Topology
Point-to-Point Layer-2 Bridge: Main Office -> Cambium/Ubiquiti PtP Radios -> Remote Branch Switch
NODE 01
Main Office Router & Switch
Gateway VLANs (VLAN 10 Mgmt, VLAN 20 Staff, VLAN 30 Voice)
NODE 02
Master Radio (AP PtP / TDD Master)
Cambium Force 300-25 or Ubiquiti PowerBeam 5AC (WDS Transparent Bridge)
NODE 03
5 GHz Outdoor RF Link (Clear Fresnel)
Aligned azimuth/elevation, shielded Cat6 + surge arrestors
NODE 04
Slave Radio (SM PtP / Station)
Remote building rooftop radio (Management IP on VLAN 10)
NODE 05
Remote Distribution Switch & UniFi APs
Trunk port carrying staff & management VLANs to branch desks

Prerequisites

  • Cambium ePMP Force 300 radio with original Cambium 30V Gigabit PoE injector and shielded outdoor Cat5e/Cat6 cables.
  • Laptop Ethernet port configured with a static IP in the 169.254.1.x/24 or 192.168.0.x/24 fallback subnet.
  • Planned management VLAN ID, static management IP address, and frequency plan compliant with Communications Authority of Kenya (CA) 5 GHz band rules.

Step-by-Step Configuration

STEP 01 — Bench Power-Up & Web GUI Access

Connect the PoE port to the Force 300 and LAN port to your laptop. Open https://169.254.1.1 (or 192.168.0.1) in a browser and log in with default administrator credentials.

STEP 02 — Set Country Code & Regulatory Domain

Navigate to Configuration -> Radio. Select Kenya as the Country Code so transmit power and permitted 5 GHz channels adhere strictly to Communications Authority of Kenya (CA) limits.

STEP 03 — Select Radio Operating Mode

Choose Access Point (AP) for the master/base side or Subscriber Module (SM) for the remote/client side, and select TDD or ePTP mode depending on whether the link is PtMP or dedicated low-latency PtP.

STEP 04 — Configure Management Network & VLAN

Under Configuration -> Network, assign a static Management IP (e.g., 10.10.99.21/24), default gateway, and enable Data/Management VLAN separation so customer traffic cannot reach the radio GUI.

STEP 05 — Enforce Admin Password & Backup Config

Change the default admin password under Accounts, save changes, and export the JSON configuration backup file before hoisting the radio.

CLI / Configuration Snippet

# Cambium ePMP Force 300 Baseline Checklist (Firmware v4.7+)
Fallback IP:      169.254.1.1 / 255.255.0.0
Operating Modes:  Access Point (TDD) | Subscriber Module (TDD) | ePTP Master/Slave
Management VLAN:  VLAN 10 (Isolated from Subscriber Data VLAN)
Regulatory:       Country = Kenya (CA 5 GHz EIRP & DFS Compliance)
Expected Results & Verification

Radio responds on its assigned static management IP inside Management VLAN 10, displays the correct Kenya regulatory domain, and holds a saved configuration backup.

Troubleshooting Matrix

Issue:
Fix:
Issue:
Fix:
SECURITY HARDENING

Disable HTTP (keep HTTPS only), restrict SNMP to read-only queries from your monitoring server IP, and use WPA2-AES wireless link encryption.

BACKUP & RECOVERY

Download the configuration backup (.json) from Operations -> Backup/Restore immediately after commissioning and store it in your site documentation repository.

L
Lawrence Kamau Delight Engineering Team
Lead Systems Architect & Infrastructure Engineer
Specialization: MikroTik RouterOS 7, FreeRADIUS, Linux CWP Hosting Clusters & Network Architecture

Directs network architecture and server infrastructure at Delight Office Solutions, overseeing the core YouBroadband ISP routing matrix and enterprise deployments.

Tested on Delight Living ISP Network (YouBroadband)
Nairobi NOC • Kabiria Road, Dagoretti South
Related Technical Guides
Was this engineering guide helpful?
Need professional installation, auditing, or troubleshooting? Request Network Consultation →