Configuring a Ubiquiti NanoStation
Purpose: Configure a Ubiquiti NanoStation CPE or short-range wireless station—noting the difference between airMAX AC (5AC) and legacy airMAX M (M5) hardware.
Prerequisites
- Ubiquiti NanoStation unit with matching 24V Passive PoE (or 802.3af adapter depending on model—verify datasheet before powering).
- Laptop configured on 192.168.1.x/24 subnet (default radio IP is 192.168.1.20).
Step-by-Step Configuration
Set your laptop IP to 192.168.1.100/24, open https://192.168.1.20, select Kenya as Country, and set a new administrator username and password.
Open the Wireless tab, set Wireless Mode to Station PtMP (or Station PtP), select the target AP SSID, and enter the WPA2-AES security key.
In the Network tab, select Bridge mode (for ISP PPPoE/router handoff) or Router mode, enable Management VLAN, and assign a static management IP.
Confirm signal strength, CINR, and LAN0 1000 Mbps speed on the airOS Main dashboard.
NanoStation associates to the airMAX Access Point, passes tagged VLAN/PPPoE frames, and is reachable on its management IP.
Troubleshooting Matrix
Disable default ubnt account and restrict Web UI / SSH access to your Management VLAN subnet.
Download the .cfg backup file from System -> Configuration Management after setup.
Manages daily NOC telemetry, subscriber ticket queues, and on-site client turn-ups across corporate and residential estates in Nairobi.