Configuring UniFi access points
Purpose: Adopt and configure ceiling-mounted UniFi enterprise access points with multi-SSID VLAN mapping, fast roaming, and clean channel planning.
Prerequisites
- UniFi Access Points powered via 802.3af/at PoE switch or injector.
- Self-hosted or cloud UniFi Network Server reachable on Layer 2 or via Layer-3 set-inform.
Step-by-Step Configuration
Open the UniFi Network dashboard, locate pending APs on the management VLAN, and click Adopt.
Under Settings -> WiFi, create a Corporate SSID mapped to your Staff VLAN and a Guest SSID with Client Device Isolation enabled on a Guest VLAN.
Assign 2.4 GHz channels 1, 6, or 11 (20 MHz) and non-overlapping 5 GHz channels (40 MHz) across adjacent APs, setting 2.4 GHz transmit power to Low/Medium so clients prefer 5 GHz.
Workstations and mobile devices roam smoothly between ceiling APs while guest devices stay strictly isolated from internal servers.
Troubleshooting Matrix
Enable WPA2/WPA3 Personal or WPA2-Enterprise (RADIUS) for staff SSIDs and isolate the UniFi management VLAN.
Enable automated weekly UniFi Network Controller backups (.unf) stored off-server.
Manages daily NOC telemetry, subscriber ticket queues, and on-site client turn-ups across corporate and residential estates in Nairobi.