How to connect multiple buildings using wireless links
Purpose: Interconnect a headquarters building with two or more remote campus blocks, warehouses, or gatehouses using a hub-and-spoke PtMP or dedicated PtP topology.
Prerequisites
- Central roof/mast with line of sight to all remote buildings and managed switches at each site.
Step-by-Step Configuration
If 3+ buildings sit within a 90° arc from HQ, mount one central sector AP at HQ and directional CPEs on each block. For high-bandwidth server/CCTV links, use dedicated PtP pairs.
Tag Staff, VoIP, CCTV, and Management VLANs across the wireless links into managed switches at each building.
Install local UPS units and grounded Ethernet surge protectors at every rooftop radio entry point.
All buildings share central ERP servers, NVR surveillance recording, IP telephony, and redundant HQ internet on one shared network.
Troubleshooting Matrix
Isolate gatehouse/perimeter CCTV switches onto a dedicated VLAN so outdoor Ethernet jacks cannot reach corporate finance servers.
Maintain a campus topology diagram showing each building switch, radio IP, and wireless frequency.
Leads physical wireless and optical deployments across Dagoretti South and greater Nairobi, specializing in interference mitigation and high-throughput point-to-point links.