SOFTWARE / INFRASTRUCTURE / SECURITY / KENYA
Done
Action completed
Incident Report Wireless Networking & ISP Solutions MikroTik Router Configuration Intermediate • 6 min read

Configuring a hotspot

P Author: Peter Mwangi (Senior Network & Field Infrastructure Engineer)
Reviewed by: Lawrence Kamau (Lead Systems Architect & Infrastructure Engineer)
Published: May 1, 2026 • Last Updated: Nov 22, 2026 • Target Hardware: MikroTik RouterOS v7.x with Hotspot package enabled.

Purpose: Deploy a captive-portal Guest or Apartment Wi-Fi Hotspot on an isolated VLAN with voucher/user profiles, session timeouts, and bandwidth caps.

Prerequisites

  • Dedicated Hotspot bridge or VLAN interface (never run Hotspot on your corporate staff LAN) with IP address and DHCP pool configured.

Step-by-Step Configuration

STEP 01 — Isolate the Hotspot Interface

Create a dedicated bridge-hotspot or vlan40-hotspot with subnet 172.16.40.1/24 so captive portal DNS/HTTP redirection never affects staff devices.

STEP 02 — Run Hotspot Setup Wizard

Open IP -> Hotspot -> Hotspot Setup, select bridge-hotspot, confirm local network, masquerade, IP pool, SSL certificate (if using HTTPS login), and DNS name (e.g., wifi.portal.local).

STEP 03 — Configure User Profiles & Speed/Time Limits

Under IP -> Hotspot -> User Profiles, define Shared Users (1), Rate Limit (e.g., 10M/10M), and Session Timeout.

STEP 04 — Configure Walled Garden for Payment / Info Pages

Add required payment gateway or company landing domains to IP -> Hotspot -> Walled Garden IP List if pre-login access is needed.

Expected Results & Verification

Guests joining the Hotspot SSID are redirected to the captive portal login page and receive time- and speed-controlled internet access upon authentication.

Troubleshooting Matrix

Issue:
Fix:
SECURITY HARDENING

Disable HTTP-CHAP/HTTP-PAP cleartext login in Server Profiles if an SSL certificate is installed, and isolate Hotspot clients from all internal VLANs.

BACKUP & RECOVERY

Back up custom HTML login templates stored in the Files directory alongside your router configuration.

P
Peter Mwangi Delight Engineering Team
Senior Network & Field Infrastructure Engineer
Specialization: Cambium ePMP, Ubiquiti airMAX, Fiber GPON / SFP+ Distribution & Tower Rigging

Leads physical wireless and optical deployments across Dagoretti South and greater Nairobi, specializing in interference mitigation and high-throughput point-to-point links.

Tested on Delight Living ISP Network (YouBroadband)
Nairobi NOC • Kabiria Road, Dagoretti South
Related Technical Guides
Was this engineering guide helpful?
Need professional installation, auditing, or troubleshooting? Request Network Consultation →