Configuring bandwidth limits
Purpose: Enforce fair upload/download rate limits per office subnet or subscriber using Simple Queues and PCQ (Per Connection Queuing) without breaking hardware FastTrack unintentionally.
Prerequisites
- Identified target subnet or static client IP address and total available WAN bandwidth.
Step-by-Step Configuration
In RouterOS, FastTracked packets bypass Simple Queues. Disable or exclude queued subnets from the firewall FastTrack rule before applying Simple Queues.
Under Queues -> Simple Queues, specify Target (e.g., 192.168.30.0/24 for Guest Wi-Fi) and set Max Limit Upload/Download (e.g., 15M/15M).
Set Burst Limit, Burst Threshold, and Burst Time (e.g., 8s) so short page loads feel snappy while sustained downloads stay capped.
CLI / Configuration Snippet
# RouterOS v7.x — Limit Guest VLAN Subnet to 15 Mbps Symmetrical /queue simple add name="GUEST-VLAN30-LIMIT" target=192.168.30.0/24 \ max-limit=15M/15M queue=pcq-upload-default/pcq-download-default \ comment="Cap Guest Wi-Fi bandwidth"
Traffic from 192.168.30.0/24 turns green/yellow/red dynamically in WinBox Queues and never exceeds 15 Mbps.
Troubleshooting Matrix
Always cap Guest Wi-Fi and CCTV cloud upload streams so they cannot starve corporate VoIP or ERP traffic.
Export /queue export file=queues-backup whenever modifying QoS policies.
Architects Delight internal platforms, including the YouBroadband billing engine, landlord revenue-sharing portal, and custom CRM ticketing solutions.