SOFTWARE / INFRASTRUCTURE / SECURITY / KENYA
Done
Action completed
Technical Guide Wireless Networking & ISP Solutions Point-to-Multipoint Networks Intermediate • 6 min read

How to plan a point-to-multipoint network

M Author: Mercy Wanjiku (Full-Stack Software & Systems Engineer)
Reviewed by: Lawrence Kamau (Lead Systems Architect & Infrastructure Engineer)
Published: May 1, 2026 • Last Updated: Nov 22, 2026 • Target Hardware: Cambium ePMP 3000/3000L and Ubiquiti airMAX AC sector architectures.

Purpose: Design base-station sector coverage, azimuth orientation, downtilt, subscriber capacity per sector, and frequency reuse across estates or commercial zones.

Reference Network Topology
Point-to-Multipoint (PtMP) Tower Distribution with Management & Customer VLAN Separation
NODE 01
POP Core Router & Backhaul
MikroTik CCR/RB router fed via licensed/5GHz PtP backhaul
NODE 02
Tower Managed Switch
PoE switch isolating VLAN 99 (Radio Mgmt) from VLAN 120 (Subscriber Traffic)
NODE 03
Sector / Horn Access Point
Cambium ePMP AP or Ubiquiti Rocket Prism 5AC (GPS Sync / TDD)
NODE 04
Multiple Subscriber Modules (SMs)
Cambium Force 300 / Ubiquiti NanoStation & PowerBeam CPEs
NODE 05
Customer Premise Routers
Authenticated via PPPoE / DHCP Option 82 with per-plan rate limits

Prerequisites

  • Target subscriber map, tower elevation, and expected bandwidth tiers per subscriber.

Step-by-Step Configuration

STEP 01 — Choose Sector Beamwidth & Count

Use 90° sectors for higher subscriber density and interference rejection, or 120° sectors for broad suburban coverage.

STEP 02 — Calculate Mechanical Downtilt

Apply calculated mechanical downtilt (typically 2°–5° depending on tower height and cell radius) so signal energy concentrates on customer rooftops rather than overshooting into neighbouring cells.

STEP 03 — Plan GPS Sync & Channel Reuse

Deploy GPS-synchronized TDD sectors with alternating channels on opposite sides of the mast to conserve scarce 5 GHz spectrum.

STEP 04 — Enforce Minimum CPE Signal Thresholds

Set a strict installation policy (e.g., reject installs weaker than -65 dBm) so weak edge clients do not degrade airtime for the entire sector.

Expected Results & Verification

Balanced subscriber distribution across sectors with predictable peak-hour throughput.

Troubleshooting Matrix

Issue:
Fix:
SECURITY HARDENING

Enable client isolation on every sector AP and segregate management IPs onto VLAN 10.

BACKUP & RECOVERY

Maintain a sector capacity & azimuth map updated with every new subscriber activation.

M
Mercy Wanjiku Delight Engineering Team
Full-Stack Software & Systems Engineer
Specialization: PHP 8.3 / Laravel, AI Workflow Triage, Database Optimization & M-Pesa API Architecture

Architects Delight internal platforms, including the YouBroadband billing engine, landlord revenue-sharing portal, and custom CRM ticketing solutions.

Tested on Delight Living ISP Network (YouBroadband)
Nairobi NOC • Kabiria Road, Dagoretti South
Related Technical Guides
Was this engineering guide helpful?
Need professional installation, auditing, or troubleshooting? Request Network Consultation →