How to troubleshoot network congestion
Purpose: Isolate whether peak-hour slowness originates from upstream WAN saturation, wireless sector airtime exhaustion, router CPU load, or Layer-2 packet errors.
Prerequisites
- Access to core router interface graphs, Torch, and wireless AP performance counters.
Step-by-Step Configuration
Inspect WAN interface Rx/Tx rates during peak hours; if throughput flatlines at your ISP circuit cap, upstream capacity upgrade or queue shaping is required.
Check AP Frame/Airtime Utilization; sectors above 80% airtime with low Mbps indicate low-MCS (weak SNR) subscribers consuming excessive air time.
Run Tools -> Profile on MikroTik to see if firewall/queues saturate a single CPU core, and check Ethernet ports for FCS/align errors or duplex mismatches.
Clear distinction between upstream bandwidth limits, RF airtime bottlenecks, and physical port faults.
Troubleshooting Matrix
Ensure bandwidth queues and anti-DDoS connection limits are active so a single compromised host cannot exhaust NAT tables.
Keep 30-day SNMP interface utilization graphs to forecast capacity upgrades proactively.
Directs network architecture and server infrastructure at Delight Office Solutions, overseeing the core YouBroadband ISP routing matrix and enterprise deployments.