Technical Solutions & Field Documentation
Production-tested configuration playbooks, RouterOS CLI snippets, RF link engineering guides, and server hardening procedures authored by Delight Office Solutions engineers.
How to design a small wireless ISP network
Purpose: Architect a scalable, fault-isolated Wireless ISP (WISP) network from upstream fibre DIA intake through POP distribution sectors to customer premises.
Setting up a PPPoE server
Purpose: Deploy a production-grade PPPoE concentrator on a dedicated customer transport VLAN so ISP subscribers authenticate individually, receive dynamic bandwidth queues, and stay isolated from one another.
First-time MikroTik router configuration
Purpose: Safely initialize a MikroTik router via WinBox, replace default credentials, disable insecure management services, and set NTP/system identity before connecting to production.
Configuring Cambium Force 300
Purpose: Baseline commissioning of a Cambium ePMP Force 300 radio—covering management IP assignment, country regulatory compliance, operating mode selection, and security hardening prior to mast mounting.
Setting up a PowerBeam wireless link
Purpose: Deploy a long-range, high-gain directional Point-to-Point link using Ubiquiti PowerBeam 5AC Gen2 dish radios.
Establishing a point-to-point wireless connection
Purpose: Build a high-throughput, low-latency Layer-2 wireless backhaul between two towers or office buildings using a dedicated Cambium Force 300 pair.
How to separate customer traffic from network management traffic
Purpose: Prevent subscribers or guest users from discovering, pinging, or attempting logins against routers, switches, sector APs, and CPE radios.
Understanding line of sight and Fresnel zones
Purpose: Explain why visual line of sight alone is not enough—and how the elliptical Fresnel zone affects outdoor radio signal strength and phase cancellation.
Configuring firewall rules
Purpose: Harden the router control plane (Input chain) and isolate internal VLANs from unauthorized cross-access (Forward chain) using stateful connection tracking.
Setting up VLANs
Purpose: Segment Corporate Staff, Guest Wi-Fi, CCTV, and Network Management traffic onto isolated IEEE 802.1Q VLANs over a single trunk uplink.
Configuring bandwidth limits
Purpose: Enforce fair upload/download rate limits per office subnet or subscriber using Simple Queues and PCQ (Per Connection Queuing) without breaking hardware FastTrack unintentionally.
Establishing a wireless bridge between buildings
Purpose: Extend an office LAN, VoIP phone system, and VLANs over one link to an adjacent warehouse, annex, or branch office without trenching fibre.